PGC-780 5 in 1 Professional Clippers Dog Grooming Shaver Hair

Shernbao PGC-780 5 in 1 Professional dog shaver clippers dog grooming shaver hair shaver for dog

• Ideal for all coat types, SHERNBAO PGC-780 offers an ergonomic design and constant

speed control to deliver more power up to 7000RPM.

• With 5 different speeds, 5000/5500/60000/6500/7000RPM and low noise, lower than 65dB.

• 4 hours run time and requires 2.5 hours to charge.

• Cord/cordless operation with USB-C connection and charging station, convenience all the

way through your groom.

• It features 5-in-1 blade technology with 2 adjustable blades.

The standard blade comes with the clipper.

• With LCD display to show speed, charging status, battery status, and clipper needs cleaning

warning.

• Work perfectly with SHERNBAO® & WAHL® 5-in-1 Stainless Steel Attachment Guide Combs for additional cut lengths.

CLIPPER SPECIFICATIONS

Push the switch lever and adjust it to the desired speed position to use the clipper.

1. When the battery level is sufficient, the clipper can be operated cordless.

2. When the battery level is very low or there is no time to charge the clipper, it can be temporary operated with a cord like the corded version.

* The battery will be charged simultaneously when the clipper operated with a cord

ON/OFF

Speed adjustment button :5000 - 5500 - 6000 - 6500 - 7000 RPM

Blade Length Adjustment Operation

CHARGING INSTRUCTION

PGC-780 support working with cord and cordless, to meet the demands of long working hours. Cordless using is more convenient.

The clipper can be charged by charing cable and your power adaptor.

When fully charged, please remove the charing cable.

Remaining power from 0% to 100% takes

only 150 minutes, convenient for you to use at any time.

During using the clipper with cord, it can be charged at the same time.

LCD DISPLAY

POWER DISPLAY ON CORDLESS MODE

POWER DISPLAY ON CORDED MODE

MAINTAINING BLADES

CAUTION:

Turn OFF the clipper and disconnect from outlet before performing maintenance.

BLADE REMOVAL, MAINTENANCE AND INSTALLATION

BLADE REMOVAL

Hold the clipper face up with one hand and press the blade down with thumb, then remove the blade into the other hand to avoid dropping the blade.

BLADE MAINTENANCE

1. Blade cleaning: Press and hold the top of the shear blade.

Use the cleaning brush to clean hair between the shear blade and the fixed blade.

2. Blade oiling: Use 1-2 drops of lubricating oil on the 5 points

shown below.

BLADE INSTALLATION

Hold the clipper face down with one hand and place the bottom of

the blade aligning the middle of the blade with the clipper.

Push the front of the blade down until it snaps into place.

OPTIONAL BLADE SERIES

PGC-780B

Standard blade: 0.7 - 1.3 - 1.9 - 2.5 - 3.0 mm

Size adjustable: 30 - 15 - 10 - 9 – 8

PGC-780TB

Fine blade: 0.5 - 1.0 - 1.6 - 2.2 - 2.8 mm

Size adjustable:40 - 30 - 15 - 10 – 9

Material

Comb blade: Stainless steel

Shear blade: Titanium coating ceramic

Work with 5-in-1 style blade clippers

SHERNBAO PGC-780

WAHL® Arco, Bravura, Chromado, Creativa, Figura, Motion, Supergroom ANDIS® Pulse li 5, Supra Li 5

OPTIONAL ACCESSORIES

Work perfectly with SHERNBAO & Wahl® 5-in-1 Stainless Steel Attachment Guide Combs for additional

cut lengths.

* Please adjust the FINE blade to the "40" position when using combs.

* Please adjust the STANDARD blade to the "30" position when using combs.